Installation of Aluminium Composite Panel

Information Center

Installation of Aluminium Composite Panel

10/27/2009 Processing Installation

Aluminium Composite Panel is very easy to process. Cutting, milling, slotting, side-folding and curving can be easily fulfilled by simple tools used for processing timber and metal. It can be shaped into various shapes such as curve, reserve curve, curve corner and sharp curve according to requirements of the building design. It is incomparable for other decorating materials.

Normal aluminium product processing machinery and wood product processing machinery can be used for processing of our panels without any special device.
 

 installation of aluminium composite panel
Saw Cutting
It can be easily processed with wood product processing saw and plate saw. It is recommended to use a hard alloy blade.		 Saw Cutting
Slotting
It is important to make the 'U' type slotting process with a distance of 0.4-5mm from the polyethylene substrate.		 Slotting

1) Milling machine and trimmer
Use the modified drill as shown in the left chart.
Running speed: 20,000 - 30,000rpm.
Feed speed: 3 - 5m/min.

Material: Hard alloy
2) When processing a large quantity of 'U' type slots
It is recommended to use a round saw and belt saw.
The following is an example of slotter:

Material: Hard alloy flake
Outer diameter: 305mm
Number of teeth: 24
Running speed: 3,000 - 5,000rpm

 Milling machine and trimmer
Bending with 3-roller panel bender
3-roller panel bender is preferable for bending of large internal diameter to plate folder.		 Bending with 3-roller panel bender
Riveting
Countersink rivet to make a joint from one direction.		 Riveting
Bolting
Considering the formation limit, the formula e-2D is the best calculation way of aperture D and distance from the centre hole to the plate end.		 Bolting